Showing posts with label Tohatsu. Show all posts
Showing posts with label Tohatsu. Show all posts

Sunday, 17 December 2017

Grand Laker canoe !


From  http://www.canoetripping.net and a post by Robin Lauer, a fan of Chestnut canoes, to whom we passed on a Chum a few years back:

Grand Lakers are to eastern Maine's Grand Lake Stream area what drift boats are to the great fishing rivers out west. They came about in the 1920's or so, Guides would get their big 20 foot traditional canoes towed up lakes via lumber steam barges with clients (Sports) and paddle back fishing for trout and salmon.

When outboard motors came about, they added a square back transom, but still kept the ability to paddle a Sport into quiet coves to fly cast for the fish. Today, the Grand Laker is the boat of choice for guides in the Grand Lake Stream area and the Sports are attracted to these craft as they where almost 100 years ago.


Still being built by a select few, and a bargain for the amount of work and materials that go into them, between the exchange and other projects acquiring one has been out of reach until recently.
 Dale Tobey, builder and restorers of Grand Lakers as well as guiding out of them, offered up a boat needing some repairs and restoration at a price too good to be true, and when he offered to deliver it closer to relatives to keep our drive down it was a done deal.

 
Dale guiding. The boats handle a 10 hp engine with ease. 

At work in his shop
 

Registered Maine Master Guide
Hunting and Fishing. Specializing in Bear and Bobcat hunts with hounds.
Dale Tobey
Grand Lake Stream, ME 04668
207-796-2884





More shots of Grand Lakers in their element in Maine








Heading back to the garage until the new year when we can take a road trip
 Could have used a bigger trailer for  the  200lb boat

Waiting for pickup with rail stock tied in


New rails and a few ribs and refinishing and it will be ready this spring
 

At 19ft long and 4' wide, theres lots of room for kids, fishing and camping gear

 

Just what Northern Ontario lakes and rivers need




The lightest 4 stroke 9.8hp, after breaking in this past summer its a great match  for the hull. Quiet, light and great on fuel.
More to come once it arrives in the shop.

Sunday, 28 May 2017

Trailer mods and a paint job for the upcoming fishing season

New trailer, needing a few small mods to fit the Peenoe

 Picture courtesy of
 http://solopacificrow.com/
Originally built for a 21' expedition row boat. Eventually made the journey from the coastal US to Australia. The website chronicles this incredible journey and accomplishment. 

 
Last summer, with a 6hp Johnson


Pushing away, not bad for a 1966 model, though not enough power to cross the lake quickly
 
  
Boat slides though the water nicely, and gets its stability from the flared design


 The reason for the effort

As received, the 16' doesnt fill up the 21' the trailer was fit for. Tongue weight was too heavy as the axle was too far back and the taillight rails were too far back, as for the boat below. 
 

 Rails cut off, to be welded back and taillights put back on

 Axle and springs moved ahead 18"

 Better balance

 
 Lots of help

 Ready to be welded up, boat to be sanded and prepped for paint

 Sanded and wiped down

 
Super wide midsection

Paint of choice, terrible fumes but hard as nails when cured
New power, 4 stroke clean and quite, and lightest in its class at 81lbs. 

 Narrow stern holding a 9.8

Another shot, width of boat gives it stability and 10hp rating