Showing posts with label Epoxy. Show all posts
Showing posts with label Epoxy. Show all posts

Thursday, 1 March 2018

Grand Laker nearly done

Getting close to the water, we'll beat spring and be waiting. Almost done and ready


Grinding away loose fibreglass for patch with epoxy and glass , the last bit of damage done when the


Starting the sanding for new paint

Patch over both sides of stem


Half way there
 

Feathering in with fairing compound



Taped off for paint

Ready for Grand Lake Green




First coat done


Second coat of new varnish inside


Seat and spray rails left to do

6hp for looks

Will be replaced with a 9.8

Rails in place for fitting

Ash rails epoxy sealed and varnished

Evinrude 9.8 in place on transom on a Laker

Unit on trailer ready for water - next is the trailer rebuild

Sunday, 17 September 2017

A project for Grade 7s and 8s - introduction to boatbuilding


 Our oldest started high school this year, after having some great teachers for 7 and 8.  We were approached to help get a new club going for the kids, run by the science/shop teacher. It seems the tech/shop class is under attack by the school board and the gov't, first cutting cords to the machinery and finally reducing the available projects to hand tools only. Still the teacher perseveres, and we've provided a 14' stripper form for solo paddling, which we'll tackle next semester. For this fall, we'll be assisting while the kids tackle a stitch and glue paddling and sailing canoe. Rewarding for me, and the required volunteer hours necessary before graduation from high school for our oldest.


A nice strip building form, donated by a retired teacher who was anxious to see kids build on it, after sitting for so many years.


On its way home

Quick stop for some New Orleans pizza, we're definitely in small town Ontario

Materials for this boat are more costly, requiring clear stock at least 15' long, and to be milled. Some hard core scrounging has turned some up, but it wont be ready till later in the fall. It will be a heck of a project for the second half of the school year.


Bead and cove strips for stripper construction

Underway on a form

 Stripper boat, painted exterior hull



Epoxy, fillers, glass tape and copper wire for stitching hull panels together

Plans set from Lost in the Woods Boatworks in Parry Sound, from back when they supplied plans, kits and completed boats.




Hull set up for sailing




Plan hull makes a great paddler


Set for sailing with a centerboard


Panel shapes cut out


Assembled hull

Copper wire stitches holding panels together



Bright finished, varnished hull rather than paint.

When mentioned to the kids and asked who would be interested, all 32 potential participants stepped up and wanted in. This will be the perfect opportunity to get them involved in creating something that in this day and age seems so far removed from public schools. Shop class, industrial arts, whatever you want to call it, used to be fantastic. Torches, lathes, power tools, metal and woodworking were all part of the experience. Increasingly kids aspire to buy things, hopefully this sets a few on the path of aspiring to build things. 

Monday, 18 May 2015

Freighter canoe update

Link to here: http://blog.ravenwoodcanoes.com/2015/03/the-fishing-machine-or-currently-about.html

Some progress, after interior paint. Rails are done, thwarts in. next is hang seats, and hull and deck paint. It will get kevlar skid plates, and an engine and its on the water.


Good bye blue!


Looking better, outside is next


Few more coats of varnish for the ash


Damn baby blue is ugly.


1st of 3 coats. Epifanes produces a nice, hard enamel finish.



Time for kevlar skid plates


All 3 keels plus stem and stern


Hard beach landings and floating over rocks and shoals arent kind to unprotected gel coat


Broad stern cover


bombproof stem


Black pigment in the skids will blend them in with the black hull paint


Much tougher!


Filling in the felt as it starves while epoxy is drawn down


One more coat of black and the yellow disappears


Almost all cured. 


Final coat goes on after tape removed to fill felt and seal edges


Curing outside


Protection!




Stern cover


Paint job next, hang seats and  go fishing